Reliable signals.
Precise control.

Applications

Supervisory electrical equipment and station control circuits; outdoor installation in wet or dry cable trenches, as described in the datasheet.

Reference standard

ICEA S-61-402 (NEMA WC 5)

Rated voltage / temperature

600 V; maximum conductor temperature 75 °C.

Conductor

Concentric stranded annealed copper.

Nominal conductor sizes

0.5, 0.75, 1, 1.5, 2.5, 4, 6, 10 mm²; refer to the PDF for the listed combinations.

Core configurations

2–30 cores, in the configurations listed in the PDF.

Insulation

Black PVC with number marking; other identification colours may be supplied to special order.

Filler and wrapping

Non-hygroscopic PVC rod and/or polypropylene filler; polyester (Mylar) wrapping tape.

Screen

No metallic screen specified.

Outer sheath

Black PVC.

Optional sheath

Special flame-retardant PVC can be supplied on request; see PDF.

Refer to the original PDF for available sizes, dimensions, electrical characteristics and packing details.

Applications

Supervisory electrical equipment and station control circuits; outdoor installation in wet or dry cable trenches, as described in the datasheet.

Reference standard

ICEA S-61-402 (NEMA WC 5)

Rated voltage / temperature

600 V; maximum conductor temperature 75 °C.

Conductor

Concentric stranded annealed copper.

Nominal conductor sizes

0.5, 0.75, 1, 1.5, 2.5, 4, 6, 10 mm²; refer to the PDF for the listed combinations.

Core configurations

2–30 cores, in the configurations listed in the PDF.

Insulation

Black PVC with number marking; other identification colours may be supplied to special order.

Filler and wrapping

Non-hygroscopic PVC rod and/or polypropylene filler; polyester (Mylar) wrapping tape.

Bedding

Black PVC.

Screen

Annealed copper tape.

Separator

Polyester (Mylar) tape.

Outer sheath

Black PVC.

Optional sheath

Special flame-retardant PVC can be supplied on request; see PDF.

Refer to the original PDF for available sizes, dimensions, electrical characteristics and packing details.

Applications

Supervisory electrical equipment and station control circuits; outdoor installation in wet or dry cable trenches, as described in the datasheet.

Reference standard

ICEA S-61-402 (NEMA WC 5)

Rated voltage / temperature

600 V; maximum conductor temperature 75 °C.

Conductor

Flexible bunched annealed copper.

Nominal conductor sizes

0.5, 0.75, 1, 1.5, 2.5, 4, 6, 10 mm²; refer to the PDF for the listed combinations.

Core configurations

2–30 cores, in the configurations listed in the PDF.

Insulation

Black PVC with number marking; other identification colours may be supplied to special order.

Filler and wrapping

Non-hygroscopic PVC rod and/or polypropylene filler; polyester (Mylar) wrapping tape.

Screen

No metallic screen specified.

Outer sheath

Black PVC.

Optional sheath

Special flame-retardant PVC can be supplied on request; see PDF.

Refer to the original PDF for available sizes, dimensions, electrical characteristics and packing details.

Applications

Supervisory electrical equipment and station control circuits; outdoor installation in wet or dry cable trenches, as described in the datasheet.

Reference standard

ICEA S-61-402 (NEMA WC 5)

Rated voltage / temperature

600 V; maximum conductor temperature 75 °C.

Conductor

Flexible bunched annealed copper.

Nominal conductor sizes

0.5, 0.75, 1, 1.5, 2.5, 4, 6, 10 mm²; refer to the PDF for the listed combinations.

Core configurations

2–30 cores, in the configurations listed in the PDF.

Insulation

Black PVC with number marking; other identification colours may be supplied to special order.

Filler and wrapping

Non-hygroscopic PVC rod and/or polypropylene filler; polyester (Mylar) wrapping tape.

Bedding

Black PVC.

Screen

Annealed copper tape.

Separator

Polyester (Mylar) tape.

Outer sheath

Black PVC.

Optional sheath

Special flame-retardant PVC can be supplied on request; see PDF.

Refer to the original PDF for available sizes, dimensions, electrical characteristics and packing details.

Applications

Supervisory electrical equipment and station control circuits; outdoor installation in wet or dry cable trenches, as described in the datasheet.

Reference standard

IEC 60502-1

Rated voltage / temperature

600 V; maximum conductor temperature 70 °C.

Conductor

Concentric stranded annealed copper.

Nominal conductor sizes

1.5, 2.5, 4, 6, 10 mm²; refer to the PDF for the listed combinations.

Core configurations

2–30 cores, in the configurations listed in the PDF.

Insulation

Black PVC with number marking; other identification colours may be supplied to special order.

Filler and wrapping

Non-hygroscopic PVC rod and/or polypropylene filler; polyester (Mylar) wrapping tape.

Screen

No metallic screen specified.

Outer sheath

Black PVC.

Optional sheath

Special flame-retardant PVC can be supplied on request; see PDF.

Refer to the original PDF for available sizes, dimensions, electrical characteristics and packing details.

Applications

Supervisory electrical equipment and station control circuits; outdoor installation in wet or dry cable trenches, as described in the datasheet.

Reference standard

IEC 60502-1

Rated voltage / temperature

600 V; maximum conductor temperature 70 °C.

Conductor

Concentric stranded annealed copper.

Nominal conductor sizes

1.5, 2.5, 4, 6, 10 mm²; refer to the PDF for the listed combinations.

Core configurations

2–30 cores, in the configurations listed in the PDF.

Insulation

Black PVC with number marking; other identification colours may be supplied to special order.

Filler and wrapping

Non-hygroscopic PVC rod and/or polypropylene filler; polyester (Mylar) wrapping tape.

Bedding

Black PVC.

Screen

Annealed copper tape.

Separator

Polyester (Mylar) tape.

Outer sheath

Black PVC.

Optional sheath

Special flame-retardant PVC can be supplied on request; see PDF.

Refer to the original PDF for available sizes, dimensions, electrical characteristics and packing details.

Applications

Supervisory electrical equipment and station control circuits; outdoor installation in wet or dry cable trenches, as described in the datasheet.

Reference standard

IEC 60502-1

Rated voltage / temperature

600 V; maximum conductor temperature 70 °C.

Conductor

Concentric stranded annealed copper.

Nominal conductor sizes

1.5, 2.5, 4, 6, 10 mm²; refer to the PDF for the listed combinations.

Core configurations

2–30 cores, in the configurations listed in the PDF.

Insulation

Black PVC with number marking; other identification colours may be supplied to special order.

Filler and wrapping

Non-hygroscopic PVC rod and/or polypropylene filler; polyester (Mylar) wrapping tape.

Bedding

Black PVC.

Screen

No metallic screen specified.

Armour

Galvanized steel wire armour.

Separator

Polyester (Mylar) tape.

Outer sheath

Black PVC.

Optional sheath

Special flame-retardant PVC can be supplied on request; see PDF.

Refer to the original PDF for available sizes, dimensions, electrical characteristics and packing details.

Applications

Supervisory electrical equipment and station control circuits; outdoor installation in wet or dry cable trenches, as described in the datasheet.

Reference standard

JIS C3401

Rated voltage / temperature

600 V; maximum conductor temperature 70 °C.

Conductor

Flexible bunched annealed copper.

Nominal conductor sizes

1, 1.5, 2.5, 4, 6 mm²; refer to the PDF for the listed combinations.

Core configurations

2–30 cores, in the configurations listed in the PDF.

Insulation

Black PVC with number marking; other identification colours may be supplied to special order.

Filler and wrapping

Non-hygroscopic PVC rod and/or polypropylene filler; polyester (Mylar) wrapping tape.

Screen

No metallic screen specified.

Outer sheath

Black PVC.

Optional sheath

Special flame-retardant PVC can be supplied on request; see PDF.

Refer to the original PDF for available sizes, dimensions, electrical characteristics and packing details.

Applications

Supervisory electrical equipment and station control circuits; outdoor installation in wet or dry cable trenches, as described in the datasheet.

Reference standard

JIS C3401

Rated voltage / temperature

600 V; maximum conductor temperature 70 °C.

Conductor

Flexible bunched annealed copper.

Nominal conductor sizes

1, 1.5, 2.5, 4, 6 mm²; refer to the PDF for the listed combinations.

Core configurations

2–30 cores, in the configurations listed in the PDF.

Insulation

Black PVC with number marking; other identification colours may be supplied to special order.

Filler and wrapping

Non-hygroscopic PVC rod and/or polypropylene filler; polyester (Mylar) wrapping tape.

Bedding

Black PVC.

Screen

Annealed copper tape.

Separator

Polyester (Mylar) tape.

Outer sheath

Black PVC.

Optional sheath

Special flame-retardant PVC can be supplied on request; see PDF.

Refer to the original PDF for available sizes, dimensions, electrical characteristics and packing details.

Applications

Control signals, signal lamps, point machines and other signalling equipment within an interlocked signal area, as described in the datasheet.

Reference standards

BS 6346:1997, BS 6360:1991 and BS 6746.

Rated voltage / temperature

750 V; maximum conductor temperature 70 °C.

Conductor

Plain annealed copper to BS 6360; solid or stranded according to the listed configuration.

Nominal conductor sizes

1.5, 2.5, 4, 6, 10, 16 and 25 mm². Available combinations depend on core count; see PDF.

Core configurations

2–30 cores, in the configurations listed in the PDF.

Insulation and identification

PVC Type TI1 to BS 6746; black cores with continuous number marking.

Wrapping

Wrapping tape around the core bundle, as shown in the construction drawing.

Bedding sheath

Black PVC Type TM1 to BS 6746.

Armour

Double galvanized steel tape armour (DSTA); tape thickness 0.2 mm.

Overall sheath

Black PVC Type TM1 to BS 6746, over the armour.

Termite protective layer

Nylon 12; thickness 0.5 mm, over the overall sheath.

Outer protective sheath

PVC Type TM1 to BS 6746, over the Nylon 12 layer.

AC test voltage

3 kV, as specified in the supplied datasheet.

Refer to the original PDF for available sizes, dimensions, electrical characteristics and packing details.

Applications

Exposed installation or installation in raceways, in wet or dry locations, or direct burial, as described in the datasheet.

Reference standard

TIS 11-2531 / VDE 0271, where applicable

Rated voltage / temperature

750 V; maximum conductor temperature 70 °C.

Conductor

Concentric stranded annealed copper.

Nominal conductor sizes

2.5 mm²; see PDF for individual sizes and configurations.

Core configurations

2, 3, 4, 5, 6, 7, 12, 19, 27 or 37 cores.

Insulation and identification

PVC. 2 cores: red / black; 3 cores: red / yellow / blue; 4 cores: red / yellow / blue / black. More than 4 cores: black with white number marking.

Inner sheath

Black PVC.

Concentric screen

Concentric copper wires with a helix of copper tape.

Outer sheath

Black PVC.

Test voltage

2,500 V, as specified in the supplied datasheet.

Refer to the original PDF for available sizes, dimensions, electrical characteristics and packing details.

Applications

Exposed installation or installation in raceways, in wet or dry locations, or direct burial, as described in the datasheet.

Reference standard

TIS 11-2531 / VDE 0271, where applicable

Rated voltage / temperature

750 V; maximum conductor temperature 70 °C.

Conductor

Concentric stranded annealed copper.

Nominal conductor sizes

1.5–300 mm²; see PDF for individual sizes and configurations.

Core configurations

2, 3 or 4 cores.

Insulation and identification

PVC. 2 cores: red / black; 3 cores: red / yellow / blue; 4 cores: red / yellow / blue / black.

Inner sheath

Black PVC.

Concentric screen

Concentric copper wires with a helix of copper tape.

Outer sheath

Black PVC.

Test voltage

2,500 V, as specified in the supplied datasheet.

Refer to the original PDF for available sizes, dimensions, electrical characteristics and packing details.

Applications

Exposed installation or installation in raceways, in wet or dry locations, or direct burial, as described in the datasheet.

Reference standard

Applied TIS 11-2531

Rated voltage / temperature

750 V; maximum conductor temperature 70 °C.

Conductor

Solid or stranded annealed copper according to the listed size.

Nominal conductor sizes

1–300 mm²; see PDF for individual sizes and configurations.

Core configurations

2, 3 or 4 cores.

Insulation and identification

PVC. 2 cores: light grey / black; 3 cores: light grey / black / red; 4 cores: light grey / black / red / blue.

Inner sheath

Black PVC.

Armour

Galvanized steel wire armour.

Outer sheath

Black PVC.

Test voltage

2,500 V, as specified in the supplied datasheet.

Refer to the original PDF for available sizes, dimensions, electrical characteristics and packing details.

Applications

Transmission of analogue and digital signals in instrument and control systems. Indoor and outdoor installation in dry or wet locations on racks or in conduits. The supplied datasheet does not recommend direct burial and prohibits direct connection to a low-impedance source such as public mains electricity.

Reference standard

BS 5308 Part 1 Type 1

Rated voltage / temperature

300/500 V; maximum conductor operating temperature +65 °C.

Conductor

Plain annealed copper to BS 6360; solid, flexible or stranded, depending on nominal size and the listed configuration.

Nominal conductor sizes

0.5, 1.0, 1.5 mm²; available combinations vary by size.

Core configuration

Twisted pairs; 1–50 pairs. See PDF for the individual configurations.

Insulation

Polyethylene (PE) Type 03 to BS 6234.

Wrapping

At least one layer of polyester tape.

Collective screen

Aluminium foil in contact with a 0.5 mm² tinned-copper drain wire.

Outer sheath

Black PVC Type TM1 to BS 6746.

Minimum bending radius

6 × overall cable diameter.

Optional sheath

Special flame-retardant PVC or low-smoke halogen-free (LSHF) material can be requested; refer to the PDF for the corresponding requirements.

Refer to the original PDF for available sizes, dimensions, electrical characteristics and packing details.

Applications

Transmission of analogue and digital signals in instrument and control systems. Indoor and outdoor installation in dry or wet locations on racks or in conduits. The supplied datasheet does not recommend direct burial and prohibits direct connection to a low-impedance source such as public mains electricity.

Reference standard

BS 5308 Part 1 Type 1

Rated voltage / temperature

300/500 V; maximum conductor operating temperature +65 °C.

Conductor

Plain annealed copper to BS 6360; solid, flexible or stranded, depending on nominal size and the listed configuration.

Nominal conductor sizes

0.5, 1.0, 1.5 mm²; available combinations vary by size.

Core configuration

Twisted pairs; 2–50 pairs. See PDF for the individual configurations.

Insulation

Polyethylene (PE) Type 03 to BS 6234.

Individual pair screens

Aluminium foil in contact with a 0.5 mm² tinned-copper drain wire for each screened pair.

Wrapping

At least one layer of polyester tape.

Collective screen

Aluminium foil in contact with a 0.5 mm² tinned-copper drain wire.

Outer sheath

Black PVC Type TM1 to BS 6746.

Minimum bending radius

6 × overall cable diameter.

Optional sheath

Special flame-retardant PVC or low-smoke halogen-free (LSHF) material can be requested; refer to the PDF for the corresponding requirements.

Refer to the original PDF for available sizes, dimensions, electrical characteristics and packing details.

Applications

Transmission of analogue and digital signals in instrument and control systems. Indoor and outdoor installation in dry or wet locations on racks or in conduits. The supplied datasheet does not recommend direct burial and prohibits direct connection to a low-impedance source such as public mains electricity.

Reference standard

BS 5308 Part 1 Type 2

Rated voltage / temperature

300/500 V; maximum conductor operating temperature +65 °C.

Conductor

Plain annealed copper to BS 6360; solid, flexible or stranded, depending on nominal size and the listed configuration.

Nominal conductor sizes

0.5, 1.0, 1.5 mm²; available combinations vary by size.

Core configuration

Twisted pairs; 1–50 pairs. See PDF for the individual configurations.

Insulation

Polyethylene (PE) Type 03 to BS 6234.

Wrapping

At least one layer of polyester tape.

Collective screen

Aluminium foil in contact with a 0.5 mm² tinned-copper drain wire.

Bedding

Black PE Type 03.

Armour

Galvanized round steel wire (SWA).

Outer sheath

Black PVC Type TM1 to BS 6746.

Minimum bending radius

8 × overall cable diameter.

Optional sheath

Special flame-retardant PVC or low-smoke halogen-free (LSHF) material can be requested; refer to the PDF for the corresponding requirements.

Refer to the original PDF for available sizes, dimensions, electrical characteristics and packing details.

Applications

Transmission of analogue and digital signals in instrument and control systems. Indoor and outdoor installation in dry or wet locations on racks or in conduits. The supplied datasheet does not recommend direct burial and prohibits direct connection to a low-impedance source such as public mains electricity.

Reference standard

BS 5308 Part 1 Type 2

Rated voltage / temperature

300/500 V; maximum conductor operating temperature +65 °C.

Conductor

Plain annealed copper to BS 6360; solid, flexible or stranded, depending on nominal size and the listed configuration.

Nominal conductor sizes

0.5, 1.0, 1.5 mm²; available combinations vary by size.

Core configuration

Twisted pairs; 2–50 pairs. See PDF for the individual configurations.

Insulation

Polyethylene (PE) Type 03 to BS 6234.

Individual pair screens

Aluminium foil in contact with a 0.5 mm² tinned-copper drain wire for each screened pair.

Wrapping

At least one layer of polyester tape.

Collective screen

Aluminium foil in contact with a 0.5 mm² tinned-copper drain wire.

Bedding

Black PE Type 03.

Armour

Galvanized round steel wire (SWA).

Outer sheath

Black PVC Type TM1 to BS 6746.

Minimum bending radius

8 × overall cable diameter.

Optional sheath

Special flame-retardant PVC or low-smoke halogen-free (LSHF) material can be requested; refer to the PDF for the corresponding requirements.

Refer to the original PDF for available sizes, dimensions, electrical characteristics and packing details.

Applications

Transmission of analogue and digital signals in instrument and control systems. Indoor and outdoor installation in dry or wet locations on racks or in conduits. The supplied datasheet does not recommend direct burial and prohibits direct connection to a low-impedance source such as public mains electricity.

Reference standard

BS 5308 Part 2 Type 1

Rated voltage / temperature

300/500 V; maximum conductor operating temperature +65 °C.

Conductor

Plain annealed copper to BS 6360; 0.5 and 0.75 mm² flexible conductors, or 1.5 mm² stranded conductors, as listed in the PDF.

Nominal conductor sizes

0.5, 0.75, 1.5 mm²; available combinations vary by size.

Core configuration

Twisted pairs; 1–50 pairs. See PDF for the individual configurations.

Insulation

Polyvinyl chloride (PVC); refer to the PDF for identification and compound details.

Wrapping

At least one layer of polyester tape.

Collective screen

Aluminium foil in contact with a 0.5 mm² tinned-copper drain wire.

Outer sheath

Black PVC Type TM1 to BS 6746.

Minimum bending radius

6 × overall cable diameter.

Optional sheath

Special flame-retardant PVC or low-smoke halogen-free (LSHF) material can be requested; refer to the PDF for the corresponding requirements.

Refer to the original PDF for available sizes, dimensions, electrical characteristics and packing details.

Applications

Transmission of analogue and digital signals in instrument and control systems. Indoor and outdoor installation in dry or wet locations on racks or in conduits. The supplied datasheet does not recommend direct burial and prohibits direct connection to a low-impedance source such as public mains electricity.

Reference standard

BS 5308 Part 2 Type 1

Rated voltage / temperature

300/500 V; maximum conductor operating temperature +65 °C.

Conductor

Plain annealed copper to BS 6360; 0.5 and 0.75 mm² flexible conductors, or 1.5 mm² stranded conductors, as listed in the PDF.

Nominal conductor sizes

0.5, 0.75, 1.5 mm²; available combinations vary by size.

Core configuration

Twisted pairs; 2–50 pairs. See PDF for the individual configurations.

Insulation

Polyvinyl chloride (PVC); refer to the PDF for identification and compound details.

Individual pair screens

Aluminium foil in contact with a 0.5 mm² tinned-copper drain wire for each screened pair.

Wrapping

At least one layer of polyester tape.

Collective screen

Aluminium foil in contact with a 0.5 mm² tinned-copper drain wire.

Outer sheath

Black PVC Type TM1 to BS 6746.

Minimum bending radius

6 × overall cable diameter.

Optional sheath

Special flame-retardant PVC or low-smoke halogen-free (LSHF) material can be requested; refer to the PDF for the corresponding requirements.

Refer to the original PDF for available sizes, dimensions, electrical characteristics and packing details.

Applications

Transmission of analogue and digital signals in instrument and control systems. Indoor and outdoor installation in dry or wet locations on racks or in conduits. The supplied datasheet does not recommend direct burial and prohibits direct connection to a low-impedance source such as public mains electricity.

Reference standard

BS 5308 Part 2 Type 1

Rated voltage / temperature

300/500 V; maximum conductor operating temperature +65 °C.

Conductor

Plain annealed copper to BS 6360; 0.5 and 0.75 mm² flexible conductors, or 1.5 mm² stranded conductors, as listed in the PDF.

Nominal conductor sizes

0.5, 0.75, 1.5 mm²; available combinations vary by size.

Core configuration

Multicore (CO); 2–40 cores. See PDF for the individual configurations.

Insulation

Polyvinyl chloride (PVC); refer to the PDF for identification and compound details.

Wrapping

At least one layer of polyester tape.

Collective screen

Aluminium foil in contact with a 0.5 mm² tinned-copper drain wire.

Outer sheath

Black PVC Type TM1 to BS 6746.

Minimum bending radius

8 × overall cable diameter.

Optional sheath

Special flame-retardant PVC or low-smoke halogen-free (LSHF) material can be requested; refer to the PDF for the corresponding requirements.

Refer to the original PDF for available sizes, dimensions, electrical characteristics and packing details.

Applications

Transmission of analogue and digital signals in instrument and control systems. Indoor and outdoor installation in dry or wet locations on racks or in conduits. The supplied datasheet does not recommend direct burial and prohibits direct connection to a low-impedance source such as public mains electricity.

Reference standard

BS 5308 Part 2 Type 2

Rated voltage / temperature

300/500 V; maximum conductor operating temperature +65 °C.

Conductor

Plain annealed copper to BS 6360; 0.5 and 0.75 mm² flexible conductors, or 1.5 mm² stranded conductors, as listed in the PDF.

Nominal conductor sizes

0.5, 0.75, 1.5 mm²; available combinations vary by size.

Core configuration

Multicore (CO); 2–40 cores. See PDF for the individual configurations.

Insulation

Polyvinyl chloride (PVC); refer to the PDF for identification and compound details.

Wrapping

At least one layer of polyester tape.

Collective screen

Aluminium foil in contact with a 0.5 mm² tinned-copper drain wire.

Bedding

Black PVC.

Armour

Galvanized round steel wire (SWA).

Outer sheath

Black PVC Type TM1 to BS 6746.

Minimum bending radius

8 × overall cable diameter.

Optional sheath

Special flame-retardant PVC or low-smoke halogen-free (LSHF) material can be requested; refer to the PDF for the corresponding requirements.

Refer to the original PDF for available sizes, dimensions, electrical characteristics and packing details.

Applications

Transmission of analogue and digital signals in instrument and control systems. Indoor and outdoor installation in dry or wet locations on racks or in conduits. The supplied datasheet does not recommend direct burial and prohibits direct connection to a low-impedance source such as public mains electricity.

Reference standard

BS 5308 Part 2 Type 2

Rated voltage / temperature

300/500 V; maximum conductor operating temperature +65 °C.

Conductor

Plain annealed copper to BS 6360; 0.5 and 0.75 mm² flexible conductors, or 1.5 mm² stranded conductors, as listed in the PDF.

Nominal conductor sizes

0.5, 0.75, 1.5 mm²; available combinations vary by size.

Core configuration

Twisted pairs; 1–50 pairs. See PDF for the individual configurations.

Insulation

Polyvinyl chloride (PVC); refer to the PDF for identification and compound details.

Wrapping

At least one layer of polyester tape.

Collective screen

Aluminium foil in contact with a 0.5 mm² tinned-copper drain wire.

Bedding

Black PVC.

Armour

Galvanized round steel wire (SWA).

Outer sheath

Black PVC Type TM1 to BS 6746.

Minimum bending radius

8 × overall cable diameter.

Optional sheath

Special flame-retardant PVC or low-smoke halogen-free (LSHF) material can be requested; refer to the PDF for the corresponding requirements.

Refer to the original PDF for available sizes, dimensions, electrical characteristics and packing details.

Applications

Transmission of analogue and digital signals in instrument and control systems. Indoor and outdoor installation in dry or wet locations on racks or in conduits. The supplied datasheet does not recommend direct burial and prohibits direct connection to a low-impedance source such as public mains electricity.

Reference standard

BS 5308 Part 2 Type 2

Rated voltage / temperature

300/500 V; maximum conductor operating temperature +65 °C.

Conductor

Plain annealed copper to BS 6360; 0.5 and 0.75 mm² flexible conductors, or 1.5 mm² stranded conductors, as listed in the PDF.

Nominal conductor sizes

0.5, 0.75, 1.5 mm²; available combinations vary by size.

Core configuration

Twisted pairs; 2–50 pairs. See PDF for the individual configurations.

Insulation

Polyvinyl chloride (PVC); refer to the PDF for identification and compound details.

Individual pair screens

Aluminium foil in contact with a 0.5 mm² tinned-copper drain wire for each screened pair.

Wrapping

At least one layer of polyester tape.

Collective screen

Aluminium foil in contact with a 0.5 mm² tinned-copper drain wire.

Bedding

Black PVC.

Armour

Galvanized round steel wire (SWA).

Outer sheath

Black PVC Type TM1 to BS 6746.

Minimum bending radius

8 × overall cable diameter.

Optional sheath

Special flame-retardant PVC or low-smoke halogen-free (LSHF) material can be requested; refer to the PDF for the corresponding requirements.

Refer to the original PDF for available sizes, dimensions, electrical characteristics and packing details.